The installation of self-tapping screws is not complicated, as long as the tools are well matched, the installation is very simple.
1. Select the corresponding screwdriver based on the groove type of the self tapping screw,Place the screwdriver in the groove of the screw, align it with the position you want to connect and tighten it, directly press the screw with force, rotate the screwdriver clockwise, and gradually insert the self tapping screw into the workpiece until the entire thread of the screw has already disappeared into the workpiece.
2. Using electric tools is more convenient and quick to install. Its working principle is also the same as a manual screwdriver, but using an electric screwdriver is also fast and simple to install.
3. When the number of self tapping screws is relatively small, a simple installation method can be adopted, specifically adopting the method of adding nuts to the corresponding specifications of bolts. The self tapping screws are fixed on the corresponding models of screws, and the same model of nuts are used to fix them, so that the three become a whole. Use a wrench to screw the screw insert into the bottom hole, and then remove the screw.
Post time: May-30-2023